Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Santa Cruz V10 CC X01 27.5 Mountain Bike 2018 Blue/Mint

The Santa Cruz V10 Mk6.0 CC 2018 is the latest iteration of the most successful downhill bike of all time. Reinvented with the help of the worlds best DH racers, the new V10 is ready to take on any course out there. Available with new colours & updated build kits for 2018. The Santa Cruz V10 is the winningest bike in downhill World Cup history. Born from racing, and more than adept at the bike park, the V10’s lower-link-driven VPP suspension sports 216mm of travel, yet pedals out of corners and down long motorway sections much more efficiently than you’d ever expect. Drawing on feedback from the Syndicate riders, the sixth generation V10 features a flip chip to adjust the geometry to give you a low and slack, and a lower and slacker setting. The shock rate has been tuned to be more linear and deliver consistent damping throughout the travel. Carbon lay-up analysis and frame shape optimization allowed for more efficient use of material, and the savings were then reinvested into other areas to ensure the bike withstands huge, flat landings. The front triangle and swingarm sport larger-diameter sections. The new V10 frame benefits from a slightly longer reach to suit evolving rider preferences, without having to compromise on its chainstay length. Images are for Illustrative purposes only. Please check the Technical Information for an accurate specification listing of the 2018 Santa Cruz V10 CC X01. Santa Cruz V10 2018 Features 216mm / 8.5 of VPP (Virtual Pivot Point) travel in two adjustable geometry positions. Giving the choice of a low and slack setting, and a lower and slacker setting. Tuned shock rate gives a more linear and consistent damping through the travel. Bringing the best of both worlds – Set for withstanding huge, flat landings while pedalling out of corners and blasting down long motorway sections much more efficiently than you’d expect. Carbon lay-up analysis and frame shape optimization allowed for more efficient use of material, and the savings were then reinvested into other areas to ensure the bike withstands huge, flat landings. Santa Cruz V10 CC X01 2018 Build Highlights Fox 40 Float RC2 203 fork SRAM X01 DH groupset SRAM Code RSC brakes Fox DHX2 Factory SLS shock Santa Cruz V10 Mk6 Frame Features 157mm rear axle spacing 216mm (8.5) VPP suspension 27.5 wheels Adjustable geometry with HIGH & LOW settings Angular contact bearings maximize stiffness Collet axle pivots lock in place without pinch bolts Double sealed pivots for long bearing life Dual grease ports on lower link for easy maintenance Full carbon dropouts and disk mounts Full carbon frame and swingarm Integrated fork bumpers with cable guide ISCG-05 tabs for chainguide compatibility Molded clip-on chainstay and upright protector Molded rubber swingarm and downtube protection Sizes: S, M, L, XL Threaded Bottom Bracket Santa Cruz V10 CC Frame The CC-level carbon frame found on the Santa Cruz V10 CC is every bit as stiff and strong as the C-level frame, but it is lighter (about 280grams lighter) and stronger thanks to the higher tech carbon fibre layup process. This material allows for higher stress points of the frame to be built without additional reinforcement, shaving off more than half a pound from the frame in the process.

Related Products :