Disclosure :This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Mucky Nutz Face Fender Black/Yellow

Like most folk we don’t like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and we came up with the Mucky Nutz Bender Fender; the lightest and most versatile mudguard available, from just 11g without fasteners. It can be used as a fork mounted mudguard; to protect the face and fork seals, or as a rear fender; to protect your rear shock and/or front mech. The Mucky Nutz Bender Fender is made from sheet thermoplastic, the profile of the mudguard is shaped such that when installed on the fork, via the hook and loop fasteners, it catches the mud, spray and whatever else you might pick up, that would eventually find its way to your face. This has been determined by working out the trajectory of the emanating matter for a given wheel speed range. Or in other words; spinning the wheel, throwing water at it and seeing where it goes. The fact that the mudguard is installed so close to the ‘knobbly bits’ means it can be small and discrete, which is a big plus for those that don’t like using them, and as it is less than 1mm thick it adds negligible weight to your bike. Mucky Nutz Bender Fender Features It stops any muck, horse, cow and doggy do from being flung into your face. It is fitted as close as possible to the knobbly bits for optimum ‘muck’ catching. It can be used on your 26in or 29er It protects your fork stanchions and brace from getting caked, reducing the need for cleaning and servicing. Discretion is its middle name. It’s small but effective. Don’t just take our word for it! There’s loads of positive chit chat on the forums and in the online mags. It’s the lightest mudguard available!! Uses hook and loop straps to attach to the brace and stanchions, so it’s easy to fit and take off. It’s compatible with all forward and double sus brace designs. It can be used as a rear shock guard on some full sus arrangements. When off, it’s easy to clean as it’s flexible and opens flat. Simply wipe it and you’re done!! Mucky Nutz Bender Fender Range Standard Fender Bender: A lightweight 22g and now 16% longer providing even more protection. We’ve done this by taking away material from non-critical areas and dumping it where it’s needed, i.e. between you and the rubber. Lite Fender Bender: It is slightly thinner than the Standard version and lighter at 16g (including fasteners). XL Fender Bender: It is the same thickness as the Standard Bender Fender but provides ultimate protection at a modest 32g. As with the original Bender Fender it can be used up front on the fork or at the rear to protect the rear sus and front mech.

Related Products :